Publicidad
Idiomas disponibles
Idiomas disponibles
Configuration: Smart Life App
To control the devices from a smartphone, they must be connected to the wireless Wi-Fi network of
the installation (home, office, etc.) and added to the mobile App, as described below:
1.
Connect your smartphone to the same Wi-Fi network where the devices will be connected. This
network must always be operational in order to be able to act on the devices via the App. Only 2.4GHz
networks are supported (5GHz networks are not).
2.
Open the Smart Life app:
a.
If this is the first time you are using it, select "Create new account" and follow the steps.
b.
If you already have a username and password, select "Log in with existing account".
3.
Long press any touch button on the light switch until it starts flashing red to initiate the
connection.
4.
In the Smart Life app:
a.
If an auto-detect window appears, click "Add" to add the device.
b.
If it does not appear automatically, press the + symbol at the top right and the "Add device"
option. Once it is detected, press "Add".
5.
Enter the password of the Wi-Fi network the device is connecting to.
6.
The pairing process starts (it can take up to 60 seconds) and at the end it will be shown as
successfully added.
It is recommended to rename the device for easy identification (name of the room, area where it is
installed, etc.).
4a
5
4b
6
4b
6
Publicidad
