EN
English
-As the appliance is in contact with food, is should
be thoroughly cleaned before putting away.
-This appliance is designed for liquidizing and
obtaining a small amount of juice, and the
consumption of the same should not be delayed for
too long. The appliance is not designed for liquidizing
large amounts of juice at the same time. Please do
not exceed the "Max" level of the recipient. When
this level is reached, please empty the contents into
another recipient to continue.
-The parts in movement should never be touched
to avoid any accident. Please do not force the
mechanism by pressing the fruit you are liquidizing
too much.
INSTRUCTIONS FOR USE
BEFORE FIRST USE
Clean all the parts of the appliance with soapy water with the exception
of the motor base, and dry with a cloth. To take the electric juicer apart,
please take the following steps:
1. Remove the lid and separate the cones from the filter.
2. Separate the jug filter.
3. To remove the jug, turn this anti-clockwise and slide it upwards to
separate it from the motor base.
4. Separate the shaft from the motor base by pulling upwards strongly.
5. To reassemble the juicer, proceed in reverse order.
OPERATION
- Unroll the cable from the base and plug it into the electricity mains.
- Cut the fruit to be liquidized in half and place it over the cone.
- Lightly press the fruit against the cone and the electric juicer will
automatically start up. The lid can be used to help pressing the fruit
down. The squeezed juice will immediately run down into the jar, which
has a level indicator to know the amount of juice that has been pressed
at all times. The electric juicer will turn either to the right or to the left to
better liquidize and obtain the juice.
- When you stop pressing on the cone, the juicer will stop. It is advisable
to clean the filter continuously if you are extracting a large amount of
juice.
6