Koenic KWK176 Manual De Instrucciones página 14

English
Congratulations
Thanks for your purchase of a KOENIC product.
Please read this manual carefully and keep it
for future reference.
Before first time use
Fill the kettle with water to the MAX level and
operate it. Repeat this process 2-3 times. This
will remove any residues remaining from the
manufacturing process.
Using the kettle
1. Open the lid by pressing the lid button.
2. Fill the kettle with water to the desired level
(MIN 0.6 / MAX 1.7 L)
3. Close the lid and place kettle on stand.
4. Use the power switch to switch kettle on.
The indicator light goes on.
5. The kettle will switch off automatically,
once the water has boiled. The indicator
light goes out and a beep signal is heard.
Wait 15-20 seconds before operating again.
Cleaning and care
1. Unplug the kettle from the mains sup-
ply and allow it to cool down.
2. Clean the base unit with a slightly damp,
lint-free cloth. Do not immerse in water.
3. Empty the kettle, open the lid, lift out the
filter and rinse it under warm water.
4. Do not use any abrasive cleaning agents.
5. Refit in reverse order.
Descaling
1. Fill the kettle with 0.5 litres of water.
2. Add two table spoons of vinegar essence.
3. Boil the mixture, allow it to stand for a short
period, then empty and rinse the kettle
thoroughly with clean water.
14
Before use, plug in
the kettle.
Fill the kettle with
water and close the
lid.
Place kettle on stand.
4
The kettle switches
off automatically.
After use unplug the
kettle.
Do not exceed the
MAX level.
4
Switch kettle on ( I ).
After cleaning, clip
the filter in place.