Hisense AX5125H Manual Del Usuario página 9

5. Connections
5.1 Dolby Atmos®
Dolby Atmos® gives you immersive listening
experience by delivering sound in three
dimensional space, and all the richness, clarity,
and power of Dolby sound. For more information,
please visit dolby.com/technologies/dolby-atmos
5.2 DTS: X
DTS: X, the border sound is no longer constrained
by fixed-position speaker placement or specific
channel signals.
For using Dolby Atmos® / DTS: X
Dolby Atmos® / DTS: X is available in HDMI eARC
/ARC mode. For the details of the connection,
please refer to " HDMI Connection HDMI eARC
/ARC
1. To use Dolby Atmos® / DTS: X mode, Your
TV has to support Dolby Atmos® / DTS: X
or HDMI audio passthrough.
2. Make sure that "Bitstream", "RAW" or "No
Encoding" is selected for bitstream in the
audio output of the connected external
device (e.g. Blu-ray DVD player, TV etc.).
3. While entering Dolby Atmos / DTS: X / Dolby
Digital / PCM format, the soundbar will show
DOLBY ATMOS / DTS: X / DOLBY AUDIO /
PCM AUDIO.
5.3 Use the HDMI Socket
Some 4K HDR TVs require the HDMI input or picture
settings to be set for HDR content reception. For
further setup details on HDR display, please refer to
the instruction manual of your TV.
Using HDMI to connec t the soundbar, AV
equipment and TV:
Method 1: Standard HDMI
- If your T V is not HDMI ARC-compliant,
connect your soundbar to the TV through a
standard HDMI connection.
1. Use an HDMI cable to connect the soundbar's
HDMI OUT (eARC/ARC) socket to the TV's
HDMI IN socket.
2. Use an HDMI cable to connect the soundbar's
HDMI IN socket to your external devices
(e.g. games consoles, DVD players and blu-ray).
-
Method 2:
eARC (Enhanced Audio Return Channel)/ ARC
(Audio Return Channel)
The eARC or ARC function allows you to send
".
audio from your ARC or eARC compliant TV to
your soundbar through a single HDMI connection.
To enjoy the ARC or eARC function, please ensure your
TV is both HDMI-CEC and ARC or eARC compliant and
set up accordingly. When correctly set up, you can
use your TV remote control to adjust the volume
output (VOL +/- and MUTE) of the soundbar.
Connect the HDMI cable from unit's HDMI
OUT (eARC/ARC)
(ARC)socket on your eARC or ARC compliant TV.
Then press the remote control to select
HDMI eARC or HDMI ARC .
Tips:
•
Your TV must support the HDMI-CEC and ARC or eARC
function. HDMI-CEC and ARC or eARC must be
set to On.
•
The setting method of HDMI-CEC and ARC or eARC
may differ depending on the TV. For details
about ARC or eARC function, please refer to the
owner's manual.
• ARC only works with devices that are HDMI
ARC capable as well as with an HDMI 1.4
cable (and higher).
HDMI OUT
Blu-ray Player / DVD Player /
Recorder / Set-top Box...
HDMI IN
HDMI OUT
USB
HDMI IN
(eARC/ARC)
5V 500mA OPTICAL
HDMI OUT
(eARC/ARC)
HDMI IN
OPTICAL
OPTICAL
COAXIAL
HDMI OUT
USB
HDMI IN
(eARC/ARC)
5V 500mA
HDMI OUT
COAXIAL
(eARC/ARC)
HDMI (eARC) or HDMI (ARC)
socket to the HDMI (eARC) or HDMI
OPTICAL
EN
AUX
OPTICAL AUX
8