Publicidad
PACKAGE CONTENTS
(1) Aviator™ foot
(1) Foot Shell
(1) CPI Sock
(1) Voyager Heel Wedge Kit
This diagram (Figure 1) is to help familiarize you with the unique parts of the Aviator. These parts are
referenced in the instructions and used when speaking with a technical service representative.
Key Components FOOT (Figure 1)
A. Integrated Pyramid
D. Toe Spring
G. Heel Pad
• CPI Sock (not shown)
PRODUCT DESCRIPTION
This prosthetic foot device is constructed with an integrated pyramid, vertical shock unit, and two
composite springs. The toe spring is secured to the housing and foreheel with fasteners.
INTENDED USE
The Aviator is a prosthetic foot designed to replace one or more functions of the biologic human foot.
INDICATIONS:
▪ Lower limb amputations
TECHNICAL SPECIFICATIONS
FOOT SIZE
WEIGHT LIMIT
21-25 cm
275 lbs / 125 kg
26-30 cm
330 lbs / 150 kg
*26cm foot w/shell
GAIT MATCHING
The gait match determines the firmness of the foot based on the user's specifications (foot size,
patient weight, and impact level).
FIRMNESS CATEGORIES
Refer to the chart below to determine the correct firmness category.
Note: Incorrect category selection may result in poor device function. Contact College Park
Technical Service if you have questions about category selection.
FIRMNESS CATEGORY CHART
WEIGHT LBS
WEIGHT KG
SIZE CM
Moderate-High Impact
SIZE CM
Moderate-High Impact
TOOLS REQUIRED
(1) 4 mm Hex Key
TOOLS RECOMMENDED
(1) Foot Horn
B. Vertical Shock Unit
E. Nut Plate
H. Heel Wedge (optional)
• Foot Shell (not shown)
BUILD HEIGHT
6.5 in / 16.4 cm
GUIDELINES
®
0-140
141-180
181-220
0-63
64-81
82-100
21-25
1
2
3
26-30
1
2
3
C. Posterior Plate
F. Foreheel
CONTRAINDICATIONS:
▪ None known
FOOT WEIGHT*
979 g
221-275
276-330
101-125
126-150
4
N/A
4
5
EN
Publicidad
