ACD GRUPPE M260TE Set Instrucciones Breves página 5

3 Handling
Read all instructions first before using the M260TE!
Do not drink any alcohol or take any drugs while using the M260TE
and follow the saftey instructions carefully!
3.1 Prior to the initial Commissioning of the M260TE
In order to ensure that the battery inserted into the device at the factory is fully charged, insert the device into
the supplied DS260 docking station (if included in the scope of delivery), also see Section 3.2. Using the
supplied power supply unit, connect the docking station to the mains (Power LED shows a green light), also
see Section 3.2.
The battery charging process has been completed when the 'CHARGE' LED is green.
You can now use the M260TE Mobile Handheld Computer.
You can see the battery charging process in Figure 2.
Only original ACD power supply units and ACD-approved batteries
may be used for the operation of the M260TE and the DS260. The
utilization of non-approved components can lead to the
destruction of the Mobile Handheld Computer. Do not use the
ACD-approved components with a third-party device. Remove the
ATTENTION
battery from the Mobile Handheld Computer if it is not used for an
extended period of time.
The M260TE battery is a lithium ion battery pack. Lithium ion
battery packs can explode if exposed to fire. Do not disassemble
the battery pack and do not expose it to fire or heat (greater than
ATTENTION
140 °F or 60 °C).
Prior to each use, the Mobile Handheld Computer, battery, the
docking station and the connection cables must be inspected for
damages. Damaged parts must be replaced. Please contact ACD in
ATTENTION
either case.
A protection equipment to prevent deep discharge is integrated in
the battery. This prevents deep discharge under normal operating
conditions. Empty batteries should be charged promptly to
ATTENTION
prevent further deep discharge due to self-discharge.
M260TE_Brief Overview_Resumen breve_FCC_V1.11_en_es 5 / 35