DAMPERS
General information. Dimensions
The only authorized dampers for the F-308
within the European F3 Open are the KONI
2812-899-925.
Both, the front and rear dampers, have the
same piston, shims and valves configuration,
the same dimensions, and the same fitting
parts.
The damper preload is aprox. 8-9 kg, due to
the internal gas pressure.
The main dimensions are shown in the
following table.
European F3 Open Technical Comision
Comisión Técnica del European F3 Open
F 308
Owners Manual / Manual de Usuario
AMORTIGUADORES
Información general. Dimensiones
DIMENSIÓNS (Front & Rear)
Totaly extended lenght
/
Long. Total extendido
Totaly compressed lenght
/
Long. Total comprimido
Total Stroke
/
Carrera total
Los únicos amortiguadores autorizados para
el F-308, en el European F3 Open, son los
KONI 2812-899-925.
Los amortiguadores traseros y el delantero
tienen la misma configuración de pistón,
chapas y válvulas, la misma longitud total
(completamente extendidos) y las mismas
piezas para su instalación.
La
precarga
aproximadamente, de 8-9 kg, debido a la
presión interna del gas.
Las dimensiones principales de los mismos
se muestran en la siguiente tabla.
mm
315
276
39
28/54
Versión 2 de Septiembre de 2013
del
amortiguador
Version of 2 nd September 2013
es