ANATEL UL 4 Modo De Empleo página 9

Note :
- In case of internal measurements, you can cross the indicators by reversing
the order of entering the tolerance intervals (upper interval < lower interval)
- It is possible to introduce different tolerance limits on REF1 and REF2.
- It is also possible to display the tolerance limits when the instrument is working
in MIN, MAX or DELTA (TIR) mode
configuration
®
3.3. Bluetooth
The connection procedure has been designed to be simple and is signalled by
the following three states :
1° Symbol off................disconnected mode.
2° Symbol blinking .......advertising mode.
3° Symbol on .............. connected mode.
The following options can be selected to control the Bluetooth
On
Enable Bluetooth
OFF
Disable Bluetooth
rESEt Clear pairing information.
MAC
Display the MAC (Media Access Control) address.
profiles are available.
®
Three Bluetooth
SIMPLE Profile without pairing (default).
Paired and secured profile.
PAIr
HId
Virtual keyboard mode (compatible with recent equipement without
driver installation).
Note:
Pairing information are erased while profile is switched.
®
module (start advertising mode).
®
module (terminate active connection).
9
®
module.
E