TROUBLESHOOTING
WARNING
• Release the trigger switch and remove the battery before performing troubleshooting
procedures.
PROBLEM
Machine fails
to start or stops
unexpectantly.
Machine stops
intermittently
Motor runs, but
blade remains
stationary.
Poor cutting
performance
WARRANTY
For 5 years from the date of purchase, this product is warranted for the original purchaser to
be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Low battery pack charge.
Battery overheating.
Faulty internal wiring or
trigger switch.
Internal fault.
Blunt blade.
The blade has dents.
Too much friction due to
lack of lubricant.
CORRECTIVE ACTION
Charge the battery pack.
Wait for the battery to cool down, at
which point the machine can be started
again.
Contact dealer/service station.
Contact dealer/service station.
Replace or sharpen the blade.
Inspect and replace the blade.
Lubricate the blade.
15
Lowe's Home Centers LLC.
Mooresville, NC 28117
Printed in China