Llivekit AFS26A Manual De Uso página 11

EN
2 FUNCTION
FUNCTION Knob / START / Stop Button
START / Stop
a. Preset selection: press AIR FRY Button or OVEN Button to enter setting
mode, rotate the FUNCTION Knob to select the preset and the selected
icon flashes;
b. Start: after setting, press the button to start cooking;
c. Start/Stop: press while cooking to stop cooking, press again to resume
cooking and press a third time to go back to standby mode.
When it stops cooking, it will go back to standby mode if without further
operation in 1 minute.
TEMP
3
TEMP/TIME Adjustment Knob
- +
TIME
Rotate to adjust the cooking temperature and time.
4
TIME Button
TIME
Press to confirm the cooking time.
5
TEMP Button
TEMP
Press to confirm the cooking temperature.
6
ROTATE Button
ROTATE
For foods to be rotating while cooking. Select the preset with the desired
cooking temperature and time, then press the START Button and the
ROTATE Button in sequence to activate.
7
AIR FRY Y Air Fry Mode
a. when in standby mode, press the button to see the 7 preset icons in the
first row illuminating, rotate the FUNCTION Knob to select the preset and
the selected icon flashes, press the Start Button to start cooking.
b. when selecting the presets, press and hold AIR FRY Button for 3
seconds to DIY at a desired temperature and time with all icons going out.
If there is no setting for the temperature and time given, the default setting
will be 200°C and 10 minutes respectively.
19
8 OVEN
Traditional Oven Mode
a. when in standby mode, press the button to see the 7 preset icons in the
second row illuminating, rotate the FUNCTION Knob to select the preset
and the selected icon flashes, press the Start Button to start cooking.
b. when selecting the presets, press and hold OVEN Button for 3 seconds
to DIY at a desired temperature and time with all icons going out. If there
is no setting for the temperature and time given, the default setting will be
175°C and 15 minutes respectively.
9
LIGHT Button
LIGHT
Press to turn on/off the oven light.
Prior to First Use
1. Remove all the packaging materials.
2. Place the appliance on a flat, even and heat-resistant surface, and keep
a safe distance of at least 11cm between the appliance and walls,
cupboards or anything inflammable nearby.
EN
20