muvit io BT MESH + MIOWBTS001 Manual De Instrucciones página 48

Connection via AP Mode:
Activate the Phone Location. Once the application is
open, click "+" or "Add device". Select the purchased
product to enter the installation wizard. Check that the
LED is blinking slowly, if not follow the App prompts to
reset it, tick the "Blinking slowly" tick and press "Next".
Enter the password of the Wi-Fi network, press "Next",
then the application will ask you to connect via Wi-Fi
to the network "SmartLife-XXXX", to do this click on
"Reconnect", select the network indicated above, press
"Back" and follow the instructions of the application to
complete the installation.
Installation of the Irrigator without Hub:
Before starting the installation unscrew the front part
of the irrigator (see picture) and insert 3 AAA batteries.
After installation of the batteries, press and hold the
button on the irrigator for 8s, the LED should flash blue
quickly, which means that the device is ready to be
connected.
7
English