Descargar Imprimir esta página

muvit io BT MESH + MIOWBTS001 Manual De Instrucciones página 59

Publicidad

Idiomas disponibles

Idiomas disponibles

Factory reset the Bluetooth Mesh irrigation system
and try to add it again.
2. Can I control the device via 2G/3G/4G mobile
network?
The Bluetooth Mesh Hub and the mobile device must be
under the same Wi-Fi network when the product is first
added. After successful configuration of the device, you
can control it remotely via 2G/3G/4G mobile network.
3.How can I share my device with my family?
Open the application, select the product, click on the
pencil on the top right, give it to "Share device", "Add",
select one of the 3 methods shown in the application
and follow the app prompts.
4. How to reset this device?
Factory reset: after plugging in the Bluetooth Mesh Hub,
press and hold the on/off button for 8 seconds until the
LED flashes.
Hub status indicator LED:
Fast blinking (twice per second): the "Bluetooth
Mode" configuration starts.
Slow blinking (once every three seconds): the "AP
Mode" setting starts.
WARRANTY & TECHNICAL ASSISTANCE SERVICE
Terms and Conditions
innov8 Iberia guarantees the hardware and software*
included in this product for the term of three (3) years
in all its parts, against any defect of manufacture and
operation from the date of delivery to the final consumer
and without any cost for this one. To make this warranty
effective, no further requirements should be demanded
than the shipment of this product together with this
warranty and the invoice or proof of purchase.
*Warranty on software applicable to the software that contains the
physical product, not on the control application (App) within the
consumer's mobile devices.
18
English

Publicidad

loading