Microphone input [MIC]
The speaker is equipped with one input for connecting one 6.3mm jack microphone on
the back. When the microphone is connected, the input is active. The microphone mode
volume level is factory preset and cannot be adjusted.
Warning: Avoid feedback by keeping the microphone far enough away from the speakers.
If you get too close, feedback will occur and may result in damage to the speakers or the
hearing of a person near the system.
Type-C USB charging port
use a USB charging cable to connect with the charger for charging
TWS Function (Bluetooth connection for two speakers)
If you have purchased another identical Bluetooth speaker, you can pair them together
for optimal stereo sound.
1. First make sure your device is not connected to any BT speaker.
2. Turn on the two Bluetooth speaker device at the same time. The default mode is
Bluetooth mode.
3. Long press the M mode button of any one of the speakers, and both speaker device
will be automatic pairing successfully.
4. When the TWS is connected, turn on the Bluetooth function of the mobile phone. After
searching for the name of the Bluetooth speaker, click the name of the Bluetooth
speaker on the mobile phone to pair it. After the pairing is successful, open the player
of the mobile phone to play music, and the two Bluetooth speakers will play the mobile
phone synchronously selected music.
5. If you long press the shutdown button of any Bluetooth speaker, and the other
Bluetooth speaker will also be shut down synchronously.
6. When the TWS is connected, the optimal distance between the two Bluetooth speakers
is about 5 meters.
7. Press and hold the M button again to quit the TWS function to hear music from one
speaker.
Remoter Schematic diagram and operation instructions
a. Recording button
c. Sounds
e. Indoor/Outdoor sound switch
g. Volume up
i. Next track
k. Volume down
m. Microphone priority
o. 0-9 buttons
English
b. LED
d. Repeat function
f. Mode
h. Previous track
j. Microphone Volume +
l. Microphone volume down
n. Original sounds
4