Publicidad
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the studs.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4.
Install wall plate assembly
07
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
3
06
08
using four lag bolts
and four washers
3 in.
(75 mm)
7/32 in.
(5.5 mm)
.
06
09
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
4
07
07
.
17 17
17
09
08
9
Publicidad
