Assembly; Dimensions And Distances That Must Be Respected - Whirlpool AKR 313 Manual De Instrucciones

2.1 Assembly

After having cleaned
the perimeter surface,
apply the supplied
gasket to the cooktop
as shown in the figure.
Position the cooktop in the worktop opening
made respecting the dimensions indicated in
the installation instructions.
Note:
The power supply cord must be long enough
to permit its upward extraction.
To secure the cooktop, use brackets (A)
provided with it.
Fit the brackets into the relevant bores
shown by the arrows and fasten them by
means of their screws in accordance with
the thickness of the worktop (see the
following figures).

2.2 Dimensions and distances that must be respected

Notes:
•
If the distance (A) between the wall
cabinets is between 600 mm and
730 mm, height (B) must be a minimum
of 530 mm.
• If the distance (A) between the wall
cabinets is greater than the width of the
cooktop, height (B) must be a minimum
of 400 mm.
• When installing a hood above the
cooktop, refer to the hood instructions
for the correct distance.
Manual W10777749.indd 41 Manual W10777749.indd 41
Top 20 mm
Top 30-60 mm
Dimensions in mm
41
A
14/07/15 10:25 14/07/15 10:25