Publicidad
Idiomas disponibles
Idiomas disponibles
Mode selection
1) Press the power button which is red and it will turn green.
"1", "2" and "MATCH" will light.
2) Select "1", "2" to select the left/right baskets for independent cooking and free, or click "SYNC" to
synchronize the 2 baskets.
3) You can press the power button again which is green in mode selection to return to standby mode
(with the red power button illuminated separately).
Menu selection and parameter adjustment.
1) With the icon corresponding to "1" or "2" flashing the 8 menu buttons are activated and the
the parameter setting button is off. After selecting any of the 8 menus,
the corresponding selected menu will flash, with "time"&"temp"+/-, "Start/Pause" activated
and "Synchronization" activated. If the selected menu supports the SHAKE function then
will also flash. The display will alternately show the default time and temperature.
The cooking time setting format will be "minutes and seconds".
The temperature setting format will be "degrees Celsius".
2) Adjust the cooking time (TIME) with the "+" and "-" keys. The step will be 1min. in 1min.
During the ± time adjustment, the display remains on. Press and hold the button
to increase or decrease in fast mode.
When the time is set to maximum or minimum, the "+"/"-" keys turn off and stop responding.
3) Adjust the temperature (TEMP) with the "+" and "-" keys. The step will be 5ºC by 5ºC.
During the temperature adjustment the display remains on. Press and hold the button
to increase or decrease in fast mode.
If the temperature is set to maximum or minimum, the "+"/"-" keys turn off and stop responding.
4) To adjust the temperature and time in working mode, first press the button "1" or "2"
At this point, the temperature and time+/- keys light up and then press the +/- keys to adjust.
5) After setting the time and temperature, press the "START/PAUSE" button and the cooking will
begin to work. The selection keys for the left and right baskets are illuminate the display alternately
shows the temperature and time (countdown).
If the sync end function is selected, the functions are required to be configured left and right to start.
6) After selecting the menu, you can adjust the temperature and time.
If the selected menu requires stirring the food during cooking, the SHAKE function and you can
press the button to turn the function on or off.
Use the "Sync" button to turn this feature on or off.
(Note: SHAKE and Sync can only be adjusted before starting work, and cannot be opened
nor close after starting work).
7) After setting the parameters, if you press the power button directly, the
air fryer will return to standby mode and the power button will illuminate red.
8) When the two baskets are cooking simultaneously, if you press the "START/PAUSE" button
A beep will sound and both baskets will stop. The "START/PAUSE" button and display will flash.
Press the "START/PAUSE" button again to resume cooking.
9) If only one of the two baskets is paused, press the "1" or "2" button and it will flash.
Then press the "START/PAUSE" button to pause the operation.
10) In working mode, press the power button to stop the fryer function and
return to standby mode with a beep.
The motor continues to run for 20 seconds and displays 'End'.
11) If the fryer is not cooking but is on or paused and no key is touched,
It will automatically return to standby mode after 5 minutes and the power button will be pressed,
will light red.
12) After completing cooking, the fryer beeps 5 times and the display shows "End".
Publicidad
