Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
• Do not allow children to climb or play in or around this product.
• Use this unit for its intended purpose only. Do not use shelves as step ladder.
• To avoid damage, assemble the product on a sturdy, level and protective surface.
• Do not push furniture, especially on carpeted floor. Have someone help you lift the item and
place it in its new location. Remove any shelves before moving.
PREPARATION
Please read the instruction sheets completely before assembly. Examine all packaging material before
discarding carton. Remove any remaining staples from the carton before discarding. Remove all parts
from carton and separate into groups as indicated on part list. Please ensure all parts are included prior
to assembly.
Tools Required for Assembly (not included): Phillips and Flathead Screwdrivers, Safety Goggles,
Tape Measure, Pencil, Straight Edge, Drill, 3/32" Drill Bits, 7/32" Drill Bit, Jigsaw or Table Saw, Clamps or
C-Clamps, 6' Step Ladder, #8 x 2 1/2" Trim Head Screws.
2
ASSEMBLY INSTRUCTIONS
1. Measure the area requiring a filler strip. Carefully cut the filler strip to
the appropriate width and length.
2. Clamp the filler strip into drill a pilot hole.
3. Fasten the filler to the cabinet with #8 x 2 ½" frame attachment (trim
head) screws.
4. If mounting against the wall, it is recommended to measure and cut
wood trim pieces attached to the wall. L-shaped brackets and the
appropriate length of screw can be used to mount the filler strip to the
wall.
If you are using with a Blind Corner Base Cabinet (sold separately),
secure the other end of the filler strip to the inside of the cabinet with the
same pilot hole and frame attachment screw technique.
#8 x 2 1/2" screws
Filler
Blind Corner Base Cabinet
Filler –refer to your
layout for the
appropriate filler
width and distance
to pull the cabinet
from the wall.
3
Adjacent
cabinet
Publicidad
