Publicidad
ADVANCED MECHATRONIC SOLUTIONS
controlo de acessos | access control | control de acesso | crontrôle d' accès
iCylinder 09
Change the admin code:
1 - Turn on the iTEC onAccess APP.
2- Select the lock/device to create a key.
3- Touch the "gear" symbol.
4- Basic settings.
5- Option "Admin Code" and follow the instructions.
Send the electronic keys:
1- Open the iTEC onAccess APP.
2- Select the lock/device to create a key.
3- Tap "ekey". Choose a temporary key or a permanent key.
4- Enter the person's mobile number/email and tap "send".
Create card:
1- Open the iTEC onAccess APP.
2- Select the lock/device to create a card.
3- Tap the "IC card" icon.
4- Add card.
5- Choose the option "permanent, programmed or cyclic".
6- Click "OK" and follow APP instructions.
Open and Close:
1- Turn on the iTEC onAccess APP.
2- Select the lock/device you want to ooen and tap the padlock icon.
3- Check Pop Up on your mobile.
4- Observe the lock/device to be opened.
5- Tap and hold the device ico and it will close.
If you set a automatic closing, after a certain set time it will lock automatically.
19
www.itec.com.pt
Publicidad
