Publicidad
Idiomas disponibles
Idiomas disponibles
Extractores de grasa
E-III. Notice of Installation
1. Before installation, please ensure the area is clean to avoid suction
of the remaining bits of broken wood and dust.
2. It cannot share the same air ventilation tube with other appliance
such as gas tube, warmer tube, and hot wind tube.
3. The bending of ventilation tube should be ≥120C, parallel or above
the start point and should be connected to the external wall.
4. After installation, make sure that the extractor is level to avoid
grease collection at one end.
Vent Outside
If the cooker hood does not have an assembled V-flap 1, you should
mount the half-parts to the its body.
To mount the V-flap 1 you should:
• Mount two half-parts 2 into the body 6.
• A pin 3 should be top oriented.
• The axis 4 should be inserted in the holes 5 on body.
• Repeat all the operations for the 2nd half-part.
E.IV. Installation
E-IV.A. Bonn
If you have an outlet to the outside, your cooker
hood can be connected by an extraction duct
(enamel, aluminum, flexible pipe or non-flammable
material with an interior diameter of 120mm). The
expansion pipe is not included in the product.
The cooker hoods should be placed at a distance of
65 to 75 cm from the cooking surface for best effect.
www.derkochline.com
Range hoods
22
Publicidad
