Publicidad
Idiomas disponibles
Idiomas disponibles
Extractores de grasa
E-IV.C. Potsdam
If you have an outlet to the outside, your cooker hood can be connected
by an extraction duct (enamel, aluminum, flexible pipe or non-flammable
material with an interior diameter of 150mm).
Before installation, turn the unit off and unplug it from the outlet.
The cooker hood should be placed at a
distance of 15mm from the wall at least.
Use
4pcs
screws
screws (ST4*14mm) & fasten lock to
fix the hood.
Fix the pipe on the outlet, and use 4pcs screws (ST4*14mm) to fix the
PCB box, connect the power and finish the installation.
Put the hood into the hole of the cabinet.
(ST4*8mm)
&
Connect the cavity & hood with 8pcs screws
(M10*10mm), the wind direction are up,
down, left, right, the user can select
according to the space of the cabinet.
www.derkochline.com
Range hoods
26
Publicidad
