PNI SafeHouse HS261 Manual Del Usuario página 14

• Download the application:
• On your phone, activate Location and the Bluetooth
function.
• Open the application and log in.
• Select the category "Sensors" - "Smoke Detector
(WiFi)"
• Enter the password of the WiFi network.
• Press "Next" in the following interface.
• Briefly press the button on the device 3 times. The
green LED will flash frequently.
• Confirm in the application that the LED flashes often.
• After your device has been identified, press "Done"
to complete the procedure of adding the sensor to the
application.
14