Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting your wine cooler to Wi-Fi
2. Put the wine cooler in pairing mode
by holding the Wi-Fi key for 3
seconds. You will hear a beep and
see the Wi-Fi light flashing after it is
constantly on for a few seconds.
3. Ensure bluetooth is enabled on
your phone and open the
ConnectLife app. Look for the pop-
up indicating that a new appliance
has been found. Tap the button on
the pop-up and follow the
instructions to proceed.
4. If a pop-up doesn't appear, tap the
button called"Add appliance" or "+"
in the app.
5. Locate "Wine Climate Cabinet" in
the device list and select it.
6. Follow the instruction in the app to
connect your Wine Cooler. Once
the setup is complete, your Wine
Cooler will appear on your home
screen.
NOTE
•The appliance will remain in pairing
mode for a maximum of 5 minutes.
•To factory reset your network
settings, press and hold the Wi-Fi
key for 6 seconds. You will hear two
beeps once the appliance is reset.
•After resetting, the appliance will
automatically go into pairing
mode.
•A solid Wi-Fi light indicates the
appliance is successfully
connected to the home network.
25
Publicidad
