Publicidad
Idiomas disponibles
Idiomas disponibles
Using your appliance
2.Using a Phillips head screwdriver,
remove the two screws on the left
side. Then use the 4mm Allen
Wrench to remove the two screws
on the right side that hold the
upper right hinge in place.(Please
support the door when you doing
it.)
3.Move the door from the down hinge
by carefully lifting the door straight
up.
NOTE:
When removing the door,
watch for washer(s) between the
hinge and the bottom of the upper
door that may stick to the door. Do
not lose these washers.
4.Lay the door flat and use a Phillips
head screwdriver to remove the
screw holding the limit block at the
bottom of the door and replace the
limit block to the left position, then
reattach the screw.
5.Use a Phillips head screwdriver to
remove the three screws from the
air deflector, then remove the air
deflector.
6.Transform the bottom hinge from
right to left and remove the door
bracket a s following:
6.1 Unscrew the bottom right hinge
screws and the bottom left door
bracket screws.
NOTE:
Keep the hinge for the future
use.
door bracket
limit block
air deflector
bottom right hinge
28
Publicidad
