fanttik NEX L1 Pro Instrucciones página 9

●
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
●
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
●
Dress properly. Do not wear loose clothing or jewelry . Keep your hair and clothing away from moving parts. Loose clothes,
jewelry or long hair can be caught in moving parts.
●
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and
properly used. Use of dust collection can re- duce dust-related hazards.
●
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.
A careless action can cause severe injury within a fraction of a second.
Power tool use and care
●
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better
and safer at the rate for which it was de- signed.
●
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
●
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
●
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
●
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
●
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
●
Use the power tool, accessories and tool bits etc.in accordance with these instructions, taking into account the working conditions and
the work to be per- formed. Use of the power tool for operations different from those intended could result in a hazardous situation.
●
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do
not allow for safe handling and control of the tool in unexpected situations.
Battery tool use and care
●
Recharge only with the charger specified by the manufacturer, A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
●
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
●
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails , screws or other small metal
objects , that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
●
Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from
06
English –