Publicidad
Idiomas disponibles
Idiomas disponibles
Warranty .......................................
2
Safety Rules ..................................
2-3
Assembly ......................................
4
Installation ....................................
4-7
Operation
...................................
7-21
Maintenance ...................................
21
Troubleshooting
................................
22
Parts Illustration and List .......................
24-25
Espa_ol ....................................
26-49
FULL ONE YEAR WARRANTY ON CRAFTSMAN
5-SPEED
WOOD
LATHE
If this Craftsman wood lathe fails to give complete satisfaction
within one full year from the date of purchase, return it to the
nearest Sears Service Center in the United States and Sears
will repair it free of charge.
Warranty service is available by contacting Sears in-home
major brand repair service. This warranty gives you specific
legal rights and you may also have other rights which vary
from state to state.
If this wood lathe is used for commercial purposes, this war-
ranty applies for only 90 days from the date of purchase.
Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL
60179
CAUTION:
Always follow proper operating procedures as
defined in this manual -- even if you are familiar with use of
this or similar tools. Remember that being careless for even a
fraction of a second can result in severe personal injury.
BE PREPARED
FOR JOB
•
Wear proper apparel. Do not wear loose clothing, gloves,
neckties, rings, bracelets or other jewelry which may get
caught in moving parts of machine.
•
Wear protective hair covering to contain long hair.
•
Wear safety shoes with non-slip soles.
•
Wear safety glasses complying with United States ANSI
Z87.1. Everyday glasses have only impact resistant lenses.
They are NOT safety glasses.
•
Wear face mask or dust mask if operation is dusty.
•
Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
PREPARE
WORK
AREA
FOR JOB
•
Keep work area clean. Cluttered work areas invite accidents.
•
Do not use power tools in dangerous environments.
Do not
use power tools in damp or wet locations. Do not expose
power tools to rain.
•
Work area should be properly lighted.
•
Keep visitors at a safe distance from work area.
•
Keep children out of workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to
prevent any unintentional use of power tools.
•
Keep power cords from coming in contact with sharp
objects, oil, grease, and hot surfaces.
TOOL SHOULD
BE MAINTAINED
•
Always unplug tool prior to inspection.
•
Consult manual for specific maintaining and adjusting pro-
cedures.
•
Keep tool lubricated and clean for safest operation.
•
Keep all parts in working order. Check to determine that
the guard or other parts will operate properly and perform
their intended function.
•
Check for damaged parts. Check for alignment of moving
parts, binding, breakage, mounting and any other condition
that may affect a tool's operation.
•
A guard or other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
(Use parts list provided to order replacement parts.)
•
Never adjust attachments
while running. Disconnect power
to avoid accidental start-up.
•
Have damaged or worn power cords replaced immediately.
•
Keep cutting tools sharp for efficient and safest operation.
KNOW
HOW TO USE TOOL
•
Use right tool for job. Do not force tool or attachment to do
a job for which it was not designed.
•
Disconnect tool when changing attachments.
•
Avoid accidental start-up. Make sure that the tool is in the
"off" position before plugging in, turning on safety discon-
nect or activating breakers.
•
Do not force tool. It will work most efficiently at the rate for
which it was designed.
•
Keep hands away from chuck, centers and other moving parts.
•
Never leave tool running unattended. Turn the power off
and do not leave tool until it comes to a complete stop.
•
Do not overreach. Keep proper footing and balance.
•
Never stand on tool. Serious injury could occur if tool is
tipped or if centers are unintentionally
contacted.
•
Know your tool. Learn the tool's operation, application and
specific limitations.
•
Handle workpiece correctly. Mount firmly in holding
devices. Protect hands from possible injury.
• Turn machine off if workpiece splits or becomes loose.
•
Use cutting tools as recommended
in "Operation."
WARNING:
For your own safety, do not operate your wood
lathe until it is completely assembled and installed according to
instructions.
PROTECTION:
EYES,
HANDS,
FACE, BODY, EARS
•
If any part of your lathe is missing, malfunctioning,
or has
been damaged or broken, cease operating immediately
until the particular part is properly repaired or replaced.
•
Wear safety goggles that comply with United States ANSI
Z87.1 and a face shield or dust mask if operation is dusty.
Wear ear plugs or muffs during extended periods of operation.
•
Small loose pieces of wood or other objects that contact a
spinning workpiece can be propelled at very high speed.
This can be avoided by keeping the lathe clean.
2
Publicidad
