halo & SON CoFlex 3200 Manual Del Usuario página 3

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Description of Functions
By installing the CoFlex3200-SET-XXX, you can achieve an increase
in reception performance, even in remote locations. The mobile
radio frequencies (GSM, 3G, LTE, 4G, 2.4GHz WiFi) radio signal is re-
ceived via logarithmic-periodic high performance antennas and
transmitted to the terminal device via low attenuation CoFlex coaxial
cables.
Important Notes
When using antennas, the applicable laws and regula
tions of the respective country must always be observed. Dis-
pose of the antenna and accessories in accordance with the applicable
regulations of your country. Professional lightning protection is recom-
mended when installing the antenna set!
The antennas, cables and adapters must always be oper
ated away from heat (>50°C), as the function may be impaired.
The coaxial cables supplied must always be laid and handled with care
and under no circumstances should they be bent in a radius of less
than 5cm, as this could damage the coaxial cable.
Disassembling the antenna, as well as the enclosed cables and
adapters, may cause the antenna to malfunction and void the warranty.
Keep the delivered material away from open fire, sharp objects
and children.
Keep delivered material away from children! There is a risk of
injury or suffocation!
Since many environmental influences affect the antennas as
well as the reception performance, you should not rely on
being able to make an emergency call at any time.
The antenna may only be used for the specified purpose.
1. General Information

Publicidad

Tabla de contenido
loading

Tabla de contenido