Zoofari 446511 2307 Instrucciones De Uso página 6

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions
for use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
2 x frame component, lower (1)
2 x frame component, upper (2)
1 x recliner (3)
4 x anti-slip pad (4)
1 x instructions for use
Technical data
Dimensions:
approx. 56 x 35 x 56cm (W x H x D)
Dimensions, recliner: approx. 48 x 48cm (W x D)
6
Maximum load: 6kg
Date of manufacture (month/year):
12/2023
Intended use
The product is to be used indoors as a recliner
for cats. The product is not intended for commer-
cial use.
Safety instructions
Important: Read these instructions for
use carefully and be sure to keep them
handy!
Danger to life!
• Never leave children unsupervised with the
packaging material. Danger of suffocation.
• The product is not for climbing on or playing
with! Make sure that people, particularly
children, do not stand on the product or pull
themselves up on it. The product may tip over.
6 GB/IE
Risk of injury!
• Before using the product check for correct
stability!
• Place the product on a level and stable sur-
face. Do not stand it close to stairs.
• Do not place any dangerous objects such as
candles on or near the product.
• Check regularly that all connections are
secure!
• The product may be used only for its intended
purpose.
• The maximum load may not be exceeded.
• When assembling the product mind your
fingers especially! There is a risk of injury from
trapping your fingers.
• Not a toy for children!
• Keep out of the reach of children!
• Use only under supervision.
• Replace product when there are signs of
wear.
• Check the product for damage or wear before
each use. The product may be used only
when in good working order and condition!
Assembly
1. Remove the packaging.
2. Connect the two lower frame components (1),
as shown in fig. B.
3. Connect the upper frame components (2) in
exactly the same way.
4. Insert the upper frame components (2) into
the notch on the lower frame components (1).
Attach the anti-slip pads (4) to the bottom
support surfaces of the frame components
(Fig. C).
5. Attach the recliner (3) to the frame using the
hooks (3a) (fig. D).
Note: You have the option of using both sides
of the recliner.
6. Stand the product flat on the ground.
Storage, cleaning
When not in use, always store the product
clean and dry at room temperature. Only clean
the product with a damp cloth and wipe dry
afterwards.