Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
To pair with another device, you must first remove any existing Bluetooth connections.
1.
When the soundbar is in Bluetooth mode, press and hold the button on the remote control
to disconnect any previously paired devices. The soundbar will automatically remove the
device and start searching for a new device. A beep will sound and PAIR will be displayed
on the screen to confirm that the unit is searching for another device.
2.
Follow the steps 4-5 above to pair the device.
NOTE:
•
If the soundbar's Bluetooth name does not appear on your Bluetooth device,
move the devices closer together. If that does not work, turn the devices off
and then on again before starting the pairing process again.
•
When pairing the devices, make sure they are less than 10 metres apart and
there are no physical obstacles between them.
•
Once you have paired a device, the units should remember the connection
and you will not need to pair them again.
Disconnecting a Bluetooth device
•
Press the
button to change to another mode.
•
Disable the Bluetooth function on your Bluetooth device.
•
In Bluetooth mode, press and hold the
Connect power
WARNING!
•
Risk of damage to the product! Before plugging in and starting the soundbar
system, make sure that all controls are turned off or set to a low level on all
connected devices and that all audio connections are in place.
•
Check that the mains voltage corresponds to that indicated on the unit's
rating plate.
Soundbar
Connect the AC power cable to the soundbar's AC~ socket and then connect the other
end to the mains socket.
Subwoofer
Connect the AC power cable to the subwoofer's AC~ socket and then connect the other
end to the mains socket.
Pair the subwoofer with the soundbar
When the soundbar and subwoofer are first connected to the mains socket, press the
on the soundbar or remote control to turn the unit on and the units will automatically pair.
button on the remote control.
27
EN
button
Publicidad
