Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
The subwoofer indicator light will indicate the pairing status as follows:
Indicator light
Fast blink
Slow blink
Constantly on
If the pairing process is unsuccessful and no audio can be heard, the units can be manually
paired:
1.
Check that the subwoofer and soundbar AC power cables are connected properly and the
main unit is in standby mode (the white indicator light will be displayed on the soundbar's
screen).
2.
Press and hold the PAIR button on the subwoofer. The subwoofer indicator light will
blink quickly.
3.
Press the
button on the soundbar or on the remote control to turn on the soundbar.
The connection is successful when the subwoofer indicator light becomes constant.
NOTE:
•
Make sure the soundbar and subwoofer are within 6 metres with no obstacles.
If there are any obstacles, remove them.
•
If you experience difficulty with pairing, move the units closer together. Also
check that no other electronic devices are interfering with the signal and
disconnect any such devices.
•
If you are still having trouble pairing the devices, unplug the subwoofer's AC
power cable, wait 4 minutes, then reconnect it and repeat steps 1-3 above.
Operation
ON/OFF/Standby
When you first plug the soundbar into the mains socket, it will enter standby mode and the
white indicator light will be displayed on the screen.
•
Press the
button on the soundbar or remote control to turn on the soundbar. HELLO
will be displayed on the screen.
•
Press the
button again to return the unit to standby mode. If the soundbar is not used
for 15 minutes and the external devices (such as a TV or mobile device) are disconnected,
or the volume is too low, the soundbar will enter standby mode.
•
Whenever you are not using the soundbar, unplug it to fully turn it off.
Playing sound through the soundbar
1.
Connect the soundbar to the power source. Turn it on and make sure the necessary audio
connections are in place.
2.
Press the
button repeatedly to select: OPT (optical), COA (coaxial), ARC (HDM ARC) or
USB, AUX or BT (Bluetooth) mode.
Status
Subwoofer is searching for the soundbar
Pairing failed
The units are successfully paired
28
EN
Publicidad
