ASAHOM S1023 Manual Del Usuario página 5

How to use
Adjust Color
Troubleshooting
1. APP can't scan the device
·Ensure the string lights are powered on.
·Confirm Bluetooth on your smartphone is enabled.
·Position your smartphone close to the control box, then try again.
·If it still fails to scan, Press and hold the button for five seconds,
the light starts to flash and try again.
2. Can't connect to app after device reset.
·Delete the original device in the APP.
·Press and hold the button for five seconds, position your smartphone
close to the control box, then re-add the device in the APP.
:
After selecting, click on the color wheel to
adjust the whole string of lights to the same color.
:
After selection, click on the color wheel, then
click on the light bulb, you can apply the color to
the selected light bulb.
:
After selection, click on the light bulb to turn
off the light of the selected light bulb.
03