Descargar Imprimir esta página

Adler europe AD 6312 Manual De Uso página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
devices cause darkening of the above-mentioned parts. parts. It is recommended to wash
them by hand, using traditional dishwashing liquids.
33. To avoid overheating the device, do not cover the device.
34. Do not store anything in the device other than accessories belonging to it.
35. Do not use the device with an open container.
Do not touch the hot surfaces of the device
Description:
1. Time control knob
3. Power indicator lamp
6. Handle
7. Main body
9. Air outlet
Before first use.
1. Remove the packaging, stickers and accessories that are on the outside and inside of the device.
2. Thoroughly clean the grate (5) and the pot (8) with hot water with a little dishwashing liquid and a soft sponge, then wipe them with
a clean, soft cloth.
(Do not clean the device with abrasive cloths or sponges or use scouring powders as they may damage the smooth, non-stick surface
of the grill and the pot)
3. Place the main body (7) on a stable horizontal surface, connect the power cord (8) to a grounded power socket, set the temperature
knob (2) to 200 ˚C and the time knob (1) to 10 minutes to remove factory odors from the device.
4. When the device is finished, unplug the power cord (8) and repeat step 2 to clean it again after it is completely cool.
Do not wash the grate (5) and the pot (8) in the dishwasher.
Using the device:
1. Holding the handle (6) pull the pot (8) together with the grate (5) out of the body (7) and place on a stable surface.
2. The grate (5) can be removed from the pot (8)
3. Place the previously prepared products on the grate (5) at the bottom of the pot (8). Then insert the pot (8) into the main body (7)
.When filling the pot, do not exceed the MAX level placed inside.
4. Connect the closed device into a grounded power outlet.
5. Once plugged in, turn the timer knob (1) to set the desired time. Use the knob (2) to set the desired temperature. The power (3)
indicator lights will light up.
It is recommended to add about 3 minutes to the food preparation time, relative to the desired time if the unit is cooled.
6. A beep indicates that the set time has passed. Pull the pot (8) out of the main body (7) and, holding the handle (6), empty the pot (8)
of the prepared products.
7. When you have finished working, set the timer knob (1) and temperature knob (2) to the "0" position and disconnect the appliance
from the mains.
8. To terminate the appliance early, turn the timer knob (1) to the "0" position.
Tips:
Arrange the pieces of food so that the hot air flows freely between them.
If the time or temperature is not sufficient, you can always adjust the time or temperature by adjusting the timer knob (1) and
temperature knob (2) to your taste preferences.
It is recommended to check with food backing status and stir the products at least once during operation. !!WARNING!! The inside of the
device is very hot
Examples: (Indicative cooking time and temperature)
Fries: time 25 minutes / temperature 190 ˚C
Chicken wings: time: 25 minutes / temperature 170˚C
Fish: time 20 minutes / temperature 190 ˚C
Shrimps: time 20 minutes / temperature 160 ˚C
Steak: time 20 minutes / temperature 170 ˚C
2. Temperature control knob
4. Power cord
5. Grate
8. Pot
5

Publicidad

loading