Airo KJR120 Manual De Usuario E Instalacion página 53

3. INSTALLATION METHOD
3.Wiring figure
Connect the female joint of the wires group from the mainboard
with the male joint of the connective wires group. (See Fig.3-3)
Connect the other side of the connective wires group with the male
joint of the wires group leads from the wire controller.(See Fig.3-3)
Install the Adapter Board and the Display Board on the High Wall
(See the Appendix for instructions).
5
4-core shielding wire
The connection cable
Mainboard
CN40
Fig 3-3