Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instruction
The cellar should be placed in an area where the ambient temperature range is between 18-26 °C (64.4° F - 78.8° F).
If the ambient temperature is above or below this range, the performance of the unit may be affected. For example,
placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.
USING THE CONTROL PANEL
SETTING TEMPERATURE
This cellar accommodates a broad temperature range suitable for storing both red and white wines according to
your preference. Different types of wine require different temperature settings. Red wine is typically stored between
10°C (50°F) and 18°C (65°F), while white wines are kept between 4°C (40°F) and 10°C (50°F). White wine can be
temporarily stored at red wine temperatures (for less than three months) and quickly chilled before serving.
Adjusting the temperature:
Simply touch the UP or DOWN to set it as you desire. When you press these buttons for the first time, the LED display
will show the original temperature set at the factory. Each subsequent button push adjusts the temperature by one
degree in the desired direction. Keep in mind that the desired temperatures may vary based on whether the interior
light is ON or OFF and the orientation of the bottles.
Adjusting the zones:
A
There are 2 separate zones in the cellar.
(A) Top Zone
(B) Bottom Zone
B
To change the zones, simply tap the icon
"
" flashing. To switch to another zone, tap the icon
00
the
icon to save and apply the changes.
00
Symbols
Power button. One press to turn on the cellar. Press and
hold it for 3 second to turn OFF the cellar.
Press to increase or decrease the temperature.
00
Temperature display.
Switches between Celsius and Fahrenheit
temperatures.
Switch the interior light on or off.
To switch between the zone.
00
Description
on the control panel. Once touched, the display will show
again. After setting the desired temperature, tap
16
Publicidad
