Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instruction (continued)
IMPORTANT:
During a power interruption, all previous temperature settings are automatically saved, and each compartment returns
to its previous temperature setting. If the unit is unplugged, loses power, or is turned off, wait 3 to 5 minutes before
restarting. Restarting before this time may hinder the wine cellar from starting. When using the wine cellar for the first
time or after a prolonged shutdown, there might be a few degrees of variance between your selected temperature
and the one on the LED display for the initial hours of operation. After a few hours, the temperature will stabilize to the
displayed setting.
Care and Maintenance
CLEANING YOUR CELLAR:
For a thorough deep cleaning, adhere to the following steps:
1. Power down, unplug, and empty the appliance, removing all shelves.
2. Clean the inside with a mix of warm water and 2 tablespoons of baking soda per quart of water. Wash shelves with
mild detergent.
3. Wash shelves with a mild detergent solution.
4. Wring excess water from the sponge when cleaning controls or electrical parts.
5. When cleaning control areas or electrical parts, ensure to wring, excess the water from the sponge or cloth.
6. Dust the front grill and back of the unit twice a year, ensuring the power is off.
7. For optimal longevity, perform a thorough yearly cleaning of both the inside and outside of the unit.
MOVING YOUR CELLAR:
1. Remove all bottles from inside the unit.
2. Securely tape down any loose items, such as shelves, inside the appliance, and tape the door shut.
3. Turn the adjustable leg up to the base to prevent damage during transportation.
4. Ensure the appliance remains secure in the upright position during transit.
5. Protect the exterior of the appliance by covering it with a blanket or a similar protective item.
RACKING CONFIGURATION :
This wine cooler features a display shelf for showcasing your wine collection. The slide-out shelves make it easy to
view and retrieve your bottles, and they can be removed to accommodate larger bottles. When pulling out shelves,
fully open the door to avoid damaging the gasket. For convenient access, pull the shelves about halfway out of the rail
compartment.
TO REMOVE A SLIDING SHELF :
•
Remove all bottles from the shelf.
•
Pull the shelf out as far as it will go.
•
Adjust the lever on each side of the shelf, as illustrated (one side UP and the other side DOWN), and simultane-
ously, pull the shelf out completely. You may need a screwdriver to help push or pull down the lever.
17
Publicidad
