shokz ROADWAVE V102 Guia De Inicio Rapido página 2

Quick Start Guide
1.Power On
LED Indicator
Press and hold the buttons located on both temples
at the same time until the LED Indicator flashes blue and red.
*When the RoadWave is powered on for the first time,
it directly enters the pairing mode,
and the LED Indicator flashes red and blue alternately.
01
2.Connect
Settings
LED Indicator
BLUETOOTH
RoadWave by Shokz
Open your device's Bluetooth settings and
select " RoadWave by Shokz ",
you will hear a tone when the connection
has been established.
Connected