Danfoss AK-OB55 Guia De Instalacion

Installation Guide
AK-OB55 Modbus TCP/IP
Communication module
Montage / Asembly / Einbau / Montaje / Сборка / 装置
AK-OB55 Modbus TCP/IP
Principle / Prinzip / Principe / Principio / Принцип / 原理
The network configuration between the AK-CC 55 controller and the AK-SM 800A
System Manager as per below drawing. Modbus TCP/IP network must be connected
to Eth1 port of AK-SM 800A in order to maintain separation of northbound and
southbound communications and ensure system security. It will be needed to use a
DHCP server for IP address assignment of the case controllers.
System Manager
(AK-SM 800A)
Ethernet 0 Ethernet 1
UDP/IP
Remote
Connection
© Danfoss | Climate Solutions | 2024.01
AK-CC55 Single Coil /
AK-CC55 Multi Coil
AK-CC55 Single Coil UI
Mounting and removal must always be performed when there is no voltage.
Montage und Demontage sind immer in spannungslosem Zustand vorzunehmen.
Mettre toujours les appareils hors tension pour le montage et le démontage
El montaje y la retirada de módulos deben realizarse siempre cuando no hay tensión aplicada.
Монтаж и снятие должны всегда выполняться на обесточенном оборудовании.
安装和拆除必须在无电压时进行。
Eth0 Eth1
DHCP router
LAN LAN
LAN
AK-CC55
case controllers
Connection / Anschluß / Raccordement
/ Conexión / Подключение / 连接
AK-CC55
case controllers
084R8068
AN46873222300901-000101
RJ 45
AN46873222300901-000101