Cinderella Travel Manual Del Propietário página 12

RESETTING THE THERMAL SWITCH
If the temperature in the chamber becomes too high, a thermal
switch will be released. To reset it, stand in front of the toilet and
pull the toilet shell out from the rear wall. The thermal switch is
on the right side (Illustration 14). Press the button. When you hear
and feel a click (tactile feedback), the thermal switch has been
reset. If there is no tactile feedback, there are other reasons for
the yellow light.
SERVICE
Cinderella Travel operates in an acidic environment and the
incineration chamber reaches high temperatures. A service
will therefore be required at some point. Remember that
preventive maintenance will delay the need for a service
significantly.
If the toilet requires a service, contact your dealership and
provide the serial number of your toilet so that the workshop is
Illustration 14
aware of the model and which spare parts may be required to
repair your toilet. Please visit www.cinderellaeco.com for a list
of our service workshops.
12