EMERGENCY RELEASE
Emergency release loops are found on
the underside of the helmet, pull on the
loops to break the popper connection,
releasing the cheek padding from the
helmet. These tabs are for emergency
use only. Excessive use (not in an
emergency) may damage the cheekpad
assembly. Only use when necessary.
EOX COMFORT LINER
Every EOX comes with a headliner &
cheek-pads that are both removable &
washable. Not only is this component
protective against cold air but it also
reduces wind-noise.
To
remove
your
pads follow these steps: disconnect the
poppers on the cheek-pads and back of
the headliner. Then disconnect the plastic
band at the front of the headliner. Lastly,
gently pull out the liner making sure to
help the chin strap through the cheek
pads and free the plastic wings on the
cheekpads from the internal clips.
To reassemble simply follow these steps
in reverse.
EOX
AT4_MAN_01-00
M005-MAN-001
tighten, pull the strap through the adjustment
buckle. To loosen, lift the buckle away from the head,
releasing tension on the strap and then adjust to fit.
Visit our
'how to' guides
more information
headliner
&
cheek-
FIDLOCK BUCKLE
The Fidlock is engaged by moving
the top strap (with the metal buckle)
towards
strap. Once in position, both parts
magnetically lock and engage securely
in the groove. Opening the fastener is just
as easy: simply pull the red tab to release. To
for
LINER WASHING
You may want to wash your comfortliner
from time to time to keep it feeling and
smelling fresh.
1. Firstly remove the items you wish to
wash from the helmet.
2. Hand wash the padding in cold water
with a mild detergent. Rinse thoroughly
and dry out. Exposure to heat / sun may
damage / fade the material. Once fully
dry,
carefully reinsert the liner into the
helmet. The emergency tab can be pulled
tight at this time (to sit flat) if loose.
Visit
our
'how
information.
05
the
bottom
fastener
to'
guides
for
WWW.RUROC.COM
more