Descargar Imprimir esta página

Maono Maonocaster G1 Neo Manual Del Usuario página 13

Idiomas disponibles

Pairing and connection:

1. Turn on the device and the Bluetooth indicator starts flashing.

2. Search for the device in your smartphone's Bluetooth menu and find the "Maonocast-

er G1 Neo" Bluetooth device and click the name to connect.

3. Bluetooth indicator remains solid after successful connection.

4. Play your desired music or audio on your smartphone.

5. Use a streaming or recording App on your phone to start content creation.

Notes:

• Bluetooth connection is limited by distance. Do not place the phone too far away.

• The Bluetooth connectivity is only for audio input.

4. Troubleshooting

4.1 Unable to power on

① Please check if the device is powered by USB bus or an external power supply.

② Press and hold the

4.2 No sound from the external audio source

① Check if the external audio source is connected to the AUX input or Bluetooth.

② Check the

AUX volume fader and slide it upward to gradually increase the volume.

③ Check if the volume of the audio input device is turned up.

4.3 No sound from the headphones

① Check if the headphone cable is plugged into the "headphone" jack.

② Check the "Headphones" knob and turn it to the right to gradually increase the

volume.

4.4 No sound from the microphone

① Check if the microphone is correctly connected to the microphone input, unplug, and

reconnect if necessary.

② Check the

microphone volume fader and gradually increase the volume by sliding

it upwards.

③ Confirm with the microphone dealer if your microphone is compatible with

Maonocaster G1 Neo, or consult us for recommended microphone models.

④ XLR Condenser microphone needs to turn on the 48V.

4.5 No sound during live streaming

① Check if the "Maonocaster G1 Neo" is set as the default playback and recording

device in the streaming software. If not, follow the instructions in the "PC Streaming

Setup" section of this manual to set it up.

② Check if the microphone permission of the streaming software is turned on.

Logo button for more than 3 seconds to turn on the device.

- 9 -