Maono Maonocaster G1 Neo Manual Del Usuario página 7

1. Microphone gain knob_①, Mic Volume fader_②, level meter_③, and Microphone
mute_④
First, rotate the gain knob to the left and right to control the microphone's gain. Then,
slide the fader to control the XLR microphone or headset's microphone volume. The
color of the level meter indicates the level, with red indicating peaking, which may
result in distorted audio. To achieve the best audio quality, please keep the level meter
in the green and orange sections.
Short press the mute button to mute the microphone input.
Note:
1.1. The gain knob does not control the gain of the headset microphone.
1.2. Keeping the gain low will reduce the amount of environmental noise being
recorded.
2. Accompaniment volume fader_①, level meter_②, and mute_③
Slide the fade to control the volume of audio input from USB-C input port, 3.5mm
accompaniment input and Bluetooth input. To have more precise control, we
recommend only using one type of accompaniment at a time. Short press the mute
button to mute the accompaniment input.
3. Power indicator_①and power button_②
Long press the power button to turn on and off the device.
4. 48V phantom power supply switch
This button controls the phantom power of XLR microphone input . When the button is
turned on, the LED indicator turns red. Whether to turn on phantom power depends on
the type of XLR microphone you are using. In most cases, only XLR condenser
microphones require phantom power to function. If your microphone does not require
phantom power, turning it on may damage it.
Tip: Phantom power cannot be turned on when there is no XLR microphone connected.
If you don't know what type of microphone you have, please contact your microphone
manufacturer for confirmation.
Select Maono XLR condenser microphone models: PM320, PM350, PM500, A03Pro
Select Maono XLR dynamic microphone models: PD80, PD100, PD100X, PD200X,
PD300X, PD400X, HD300
5. Bluetooth LED indicator and switch
5.1. After turning on the Bluetooth by long press the switch button, the LED indicator
flashes and the device actively searches for and connects to paired devices. The
indicator remains solid after a successful connection.
5.2. Press and hold the Bluetooth button for more than 2 seconds to turn the Bluetooth
off.
6. Reverb
Use the knob to control the level of reverb effect. Rotate all the way to the left to turn
off reverb.
7. Headphones Volume
Please adjust the Headphones knob to the right to regulate the volume of the
- 3 -