Descargar Imprimir esta página

Tibret VI 437 Manual De Instrucciones página 4

Aspiradora recargable

Publicidad

Idiomas disponibles

Idiomas disponibles

After a few cleanings, clean the HEPA filter. You can easily remove it and wash it under
4.
running water, which allows it to be used repeatedly. Thanks to the filter, the vacuum clean-
er does not lose its power and its suction power is constant all the time.
5.When the battery is discharged, the USB lamp lights red and green means the battery is
5.
charged.
Charging time is about 3/4 hours.
6.
If you hear a signal coming from the vacuum cleaner it is because the battery is not charged
7.
enough.
WARNING!
1.
When the vacuum cleaner does not work, check that there is enough battery/ is
charged.
2.
The vacuum cleaner is configured with a USB cable. It can also be charged with the AC
220~240V lithium charger.
3.
The vacuum cleaner may not be used for more than 30 minutes, otherwise it may
damage the motor.
4.
It is necessary to clean the filter mesh in a timely manner (when you see that the filter is
already dirty).
5.
The vacuum cleaner can be used dry and wet function.
Environmental Protection
Waste electrical production should not be disposed of with
household waste. Please recycle where facilities exist
. Check with your Local Authority or retailer for recycling
advice.

Publicidad

loading