Brandson Equipment 306572 Manual Del Usuario página 34

Childproof lock
Press and hold the "Child lock" button for 3 seconds to set the air purifier to child
lock mode. The button is highlighted in red.
Press and hold the "Childproof lock" button for 3 seconds to deactivate the child-
proof lock. The button then lights up white again.
While this function is activated, all button functions are deactivated. Deactivate
the childproof lock to reactivate the button functions.
Ioniser function
The ioniser function is switched on by default (bright white light) when the appli-
ance is switched on. If you touch the button, the ioniser function is switched off.
7. Replacing the filter
When the service life of the filter has reached the set time (approx. 6 months),
the filter symbol is highlighted in red to remind the user to replace the filter.
First unplug the power plug and place the air purifier upside down on a table.
Then turn the air inlet grille anti-clockwise and remove it to access the old filter.
Replace the old filter with a new one and attach the intake grille by turning it
clockwise until it clicks into place according to the positioning mark.
34
-
Positioning
marking
English