Publicidad
Idiomas disponibles
Idiomas disponibles
D. Using the device
AFIRE devices have several control possibilities.
1. Manual (On/Off button)
2. Via radio remote control
The remote control is paired with your device in the factory. However, if you want to change your remote
control, you must install the new one onto your device (device in OFF position). Just press and hold the
ON/OFF button for 5 seconds. The ON/OFF button will start to blink. Then, simply press any button on
the remote control. You will hear a confirmation beep, and the remote control will be paired to the module.
Buttons on your remote control:
On/Off: Turns the device on or off. Attention: the ON/OFF button on the device must be switched on.
Orange On/Off
Orange: The row of orange LEDs can be switched on or off.
RGB
On/Off: Starts or stops the RGB lights.
Flame
height: Increases or decreases the height of the flame. With each change of height, the device will
beep. At the maximum and minimum settings, the device will no longer beep. There are 8 settings possible.
Flame
speed: Changes the speed of the flames. At the maximum and minimum settings, the device will no
longer beep. There are 8 settings possible.
Color
change: SMOOTH: 15 color circulation, 5 seconds for each color. FADE1: 15 color circulation,
fading to next color in 5 seconds. FADE2: 15 color circulation, fading to next color in 10 seconds.
ADVANCE
www.a-fireplace.com
PRESTIGE
17
Publicidad
