Sharp 43GR Guia De Inicio Rapido página 6

6
What is included in the box
Supply of this TV includes following parts:
• 1x TV
• 1x Remote control
Attaching the Stand
Please follow the instructions on last page of this user manual.
Wall mounting the TV
Install the wall mounting bracket to the television as advised by the
bracket manufacturer.
Connections
Connecting external devices - see the last page of this guide.
Getting started - initial set up
1. If rubber parts, foam parts or tape are attached to the TV frame, please
remove them gently.
2. Using the antenna cable (not supplied), connect the TV to the antenna
wall socket.
3. For connecting to the Internet with a wired connection connect a
Cat 5/Ethernet cable (not included) from the TV to your broadband
modem/router.
4.
Connect the power cable to the Electrical outlet.
5. Then press Standby button to power on TV.
6. After turning the TV on, you will be welcomed by the First Time
Installation menu.
7.
Pair your voice remote following the on-screen instructions. Press
and hold the left arrow button and
simultaneously until the instructions on the TV screen change to the
next step.
8. Select the language for the TV menu.
9. Please set desired settings in remaining screens of First installation
menu.
TV control button
The TV is equipped with a single control button located at the bottom of
the LED light. Press the button to turn the TV on/off.
• 1x TV stand installation packet
• 1x Quick Start Guide
• 1x Power cord
button on the remote
Choosing Mode Input/Source
To switch between the different input/connections.
Using the buttons on the remote control:
1. Press [SOURCE] - The source menu will appear. Alternatively,
you can press and hold the
of inputs.
2. Press [▲] or [▼] to select the input you require.
3. Press [OK].
TV Menu navigation
Use the (▲/▼/◄/►) buttons to focus on the desired item.
Press the OK button to select the item currently in focus.
Press the (back) button to go back one step in the menu.
Press and hold the (back) button to leave menu.
Press the (home) button to enter the TV Home menu.
Information on 120/144Hz Refresh Rate
This TV supports a 120/144Hz refresh rate for all resolutions up to 4K.
However, this is only available through HDMI 3 and 4 inputs. HDMI 1 and 2
inputs are limited to 60Hz for all resolutions.
Similarly, VRR / AMD FreeSync™ is supported exclusively on HDMI 3 and 4.
If you intend to connect a gaming PC or console to this TV, please make
sure to use HDMI 3 or 4.
NOTE: To achieve 4K@120/144Hz, the connected device must output
a video signal at that resolution and refresh rate. The device must be
connected to the TV using an HDMI cable marked as "Ultra high speed".
Full cinematic experience with AQUOS
Wireless Surround
This TV is compatible with the AQUOS Wireless Surround by Sharp, a
modular system where you choose the level of immersion. Simply add
a subwoofer for deeper bass, or rear speakers for theatre style surround
sound. Combined, they bring the full cinematic experience to your living
room with Dolby Atmos and DTS:X. You won't need extra software or
external devices – AQUOS Wireless Surround speakers connect wirelessly
to the TV allowing you to place them anywhere in your space.
Electronic instruction manual
To access more useful information directly from your TV, you can launch
the online manual by following these steps:
1. Press the
(home) button on your remote.
2. Using the cursor, navigate downwards to "Your apps".
3. From the list of apps, locate and select "Smart Portal".
NOTE: Please ensure that your TV is connected to the
internet in order to use this electronic manual.
(TV guide) button to display the list