Descargar Imprimir esta página

Murray FLURRY MYS2120801 Manual Del Usuario página 10

Quitanieves

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating the Snow Blower
WARNING: Never engage the auger unless your hands
and feet are away from the rotating parts.
WARNING: Keep bystanders and pets away from the
snow blower when this unit is in use.
WARNING: Watch out for rotating auger. Keep hands,
feet, hair, and loose clothing away from any moving parts
on the machine.
To Engage / Disengage the Auger
1. Engage the auger by squeezing the auger control lever
against the upper handle. (Fig.10A).
2. Release the lever to stop the auger. (Fig.10B)
Fig.10A
18
Fig.10B
WARNING: The auger will continue to rotate for a
short period after the auger control lever is released.
WARNING: If snow gets stuck in the chute do not
try to remove it before stopping the engine and
disconnecting the spark plug wire.
WARNING: Do not put your hand inside the chute or
auger.
FLURRY SNOW BLOWER
To Adjust the Snow Discharge
Direction and Height
WARNING: Never direct discharged snow towards
bystanders; this may cause serious personal injury.
Changing Discharge Direction:
To change the snow discharge direction, grasp the chute
rotation handle and rotate to the left or right. (Fig.11)
Fig.11
1
Chute rotation handle
FLURRY SNOW BLOWER
Changing Discharge Height:
WARNING: If snow is stuck in the discharge chute do
not try to remove it before:
- Releasing the auger control handle.
- Stopping the engine.
- Disconnecting the spark plug wire.
1. Grasp the chute deflector handle.
2. Squeeze the trigger and move the deflector upward or
downward to a suitable height. The snow blower offers
different angles from -5º~55º. (Fig.12A/Fig.12B/Fig.12C)
3. Release the trigger to lock the chute deflector in place.
(Fig.12C)
1
Fig.12A
55°
-5°
19

Publicidad

loading