Publicidad
Idiomas disponibles
Idiomas disponibles
9
REMOTE CONTROL
6.Insert a mercury battery (not included).
7.The power button of the remote control is labeled as such. All functions performed with the remote control work in the same way as the manual controls.
(shown in FIGURE 2).
Remote control
A. On/off
B.Speed setting
C. Mode setting
D. Timer setting
E. Adjustment of oscillation
F. Silent mode
OPERATION The FAN can be operated with the manual controls on the FAN (as shown in FIGURE 3) or with the remote control (as shown in FIGURE 2).
(FIGURE 3)
1.Place the FAN on a stable, flat surface. Plug the cable harness plug into a 230V~A.C power outlet.
2.POWER: Turn on the FAN by pressing the 'POWER' button; Turn off the FAN by pressing the 'POWER' button again.
3.SPEED: You can set the fan speed to the desired level: low (LO), medium (MI) or high (HI) by pressing the 'SPEED' button. The speed setting is displayed on the
LED panel (see FIGURE 4.MODE: Pressing the MODE button turns the fan into NORMAL (NM), NATURAL (NT) and SLEEP (SL) modes.
5.TIMER: The blower is equipped with a timer that allows you to set the operating time from 0.5 to 7.5 hours. OSC: By pressing the key
6." OSC" button, the oscillation function is started and stopped. The icon will appear on the LED panel.
7.Silent Mode: Press the "Silent Mode" button on the remote control. To put the fan into sleep mode, you won't hear a beep when you press the buttons.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
Publicidad
