OPERATION INSTRUCTIONS
UK
Open the lid.
Put items into tank directly.
To avoid scratch and friction of the products, keep glasses up,
never place upside down!
Fill with water
Fill tap water into stainless steel tank, the water should cover the
surface of the items but not exceed the "MAX-" mark.
Close the lid and plug in.
Then press "ON" button to start cleaning and the red indication light is
on.
During cleaning, you can hear a buzzing. This means that the unit is
working.
The unit will stop automatically after 3 minutes.
If another cleaning is needed, press the "ON" button again.
You can press the "OFF" button during the cleaning if you want to stop
the process.
When cleaning is finished, unplug the unit and open the lid, then take
out the cleaned item. At last, pour the water from stainless steel tank
and wipe it.
7