Levoit LVAC-200 Manual Del Usuario página 11

CARE & MAINTENANCE (CONT.)
Alternatively, the battery can be charged
separate from the vacuum body.
1. Press the Battery Release Button to
remove the battery.
2. Insert the charger into the charging port on
the battery. [Figure 12]
3. Plug the charger into an outlet. The battery
indicator lights will blink while charging.
4. When the vacuum is fully charged, the 3
battery indicator lights will turn solid for 5
minutes, then turn off.
Battery Indicator Light Chart
(While Charging)
Battery Level
0–35%
35–70%
70–100%
100%
Warning:
•
Only charge the battery with the charger
specified by Levoit.
•
If you are not using the battery for an extended
period, store it in a cool, dry place.
•
Store the battery in a semi-charged state
(at least 2 battery indicator lights) and maintain
this by charging the battery every 3 months.
•
For more information, please contact Customer
12
Support (see page
Battery Indicators
).
Emptying the Dust Bin
When dust in the dust bin reaches the MAX
line, empty the dust bin.
Warning: Do not overfill the dust bin. If
the dust bin is too full, it may affect the
performance of the vacuum.
1. Turn the vacuum off. Remove the dust
bin by pressing the Dust Bin Release
Button.
2. Hold the dust bin over a trash can
and press the Lid Release Button.
[Figure 13] Use caution, as the lid
will open when the release button is
pushed.
Note: Holding the dust bin inside a trash
can prevents dust from spilling out.
3. Empty out debris and dirt, then close
the lid.
Alternatively, you can remove the vacuum
body to empty the dust bin.
1. Remove the vacuum body by pressing
the Vacuum Body Release Button.
2. Hold the dust bin over a trash can
and press the Lid Release Button.
[Figure 13]
EN
7