Brandson 306643 Manual Del Usuario página 34

Switch off the alarm
When the alarm is activated at the set time, the backlight switches on auto-
matically. The alarm tone is now active for 2 minutes before it is automatically
switched off. To switch off the alarm, press any button.
To set the alarm to snooze mode, press the „WIFI/LIGHT/SNOOZE" button while
the alarm is sounding. The alarm symbol for the corresponding alarm will start to
flash and the alarm will sound again in 5 minutes.
9. Stored data
Maximum and minimum temperatures
The device records the highest and lowest temperature and humidity of the day,
which are automatically deleted and re-recorded every day from 0:00.
Press the „MIN/MAX" button once to display the highest temperature and hu-
midity, „MAX" appears in the display. Press the button again to display the lowest
temperature and humidity. MIN" appears on the display. Press again to return to
the standard display.
Press the „MIN/MAX" button for approx. 5 seconds to reset the minimum and
maximum values. The temperature displays „--.-" for about 3 seconds and then
returns to the current temperature display.
If the maximum or minimum values are displayed and no operation is performed
for 10 seconds, the appliance returns to the current temperature display.
34
English