Jackery SolarSaga 200 Guia Del Usuario página 4

GB
English
TECHNICAL PARAMETER
Maximum Power (Pmax)
Voltage at Open Circuit (Voc)
Current at Short Circuit (Isc)
Optimum Operating Voltage (Vmp)
Optimum Operating Current (Imp)
Maximum System Voltage (V)
Maximum Reverse Current
PV Module Protection Class
Waterproof Level
Consumer Product Category 2
Operating Temperature Range
Voltage Temperature Coe cient
Power Temperature Coe cient
Unfolded Size
Folded Size
Net Weight of Product
Maximum Number of Series Connections
Maximum Number of Parallel Connections
Unfold the bracket and place it on a flat surface. The design load is 1600Pa, and the safety
factor is 1.5 times.
STC: AM=1.5; 25°C; 1000W/m²
CAUTION
* Please read the user guide first before using this product.
* Do not bend the folding solar panels.
* Do not place the folding solar panels in trees, buildings or other shaded areas for use.
* Do not immerse the folding solar panels in water or any other liquid.
* Do not put solar panels in water directly, and use a damp cloth to gently wipe them when cleaning.
* Do not use or store the folding solar panels near open flames or flammable materials.
* Do not scratch the folding solar panels with sharp objects.
* Do not put corrosive substance on the folding solar panels.
* Do not step on or place heavy objects on the folding solar panels.
* Do not disassemble the folding solar panels.
* The output circuit of folding solar panel package must be connected to the equipment properly, and
reverse connection of positive and negative poles is strictly prohibited.
* Check the connection status of various components, wires, and plugs before use.
* It is strictly prohibited to drop the products due to the nature of the material. Otherwise, it may cause
internal damage to the solar panel, rendering the product unusable.
* This product cannot be fixed for installation. Please put away the portable folding solar panels in case
of strong winds, hail and other severe weather to avoid product damage or other hazards.
* Under normal circumstances, PV modules may be exposed to higher currents or voltages than under
standard test conditions. Therefore, when calculating the rated voltage of component, the rated current
of conductor, and the size of the control device connected to the PV output, it is required to multiply the
short-circuit current (Isc) and open circuit voltage (Voc) values marked on the component by a factor of
1.25.
* Any damage of product may lead to electric shock or fire.
* Do not let artificial spotlight shine directly on the solar modules or panels.
01
Model: JS-200C
Product Name: SolarSaga 200
200W±5%
24.8V±5%
11.2A±5%
20.0V±5%
10.0A±5%
60V
15A
Class II
IP68
Portable applications according to IEC TS 63163
-20°C~65°C (-4°F~149°F)
-0.268%/°C
-0.29%/°C
2340x552x25mm
615x552x40mm
6.4Kg±0.3Kg
3
2